DSG-01-3C2-AC110-N1-S50

More Views

DSG-01-3C2-AC110-N1-S50
$95.00

Availability: In stock

Direct replacements for Vickers, Parker, Denison, Rexroth, Yuken, Nachi, Northman


These are Solenoid Operated Directional Valves of high flow and low-pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design • Standard type….. Useable at high pressure: 31.5 MPa (4570 PSI) and high flow: 63 L/min. (16.6 U.S. GPM) • Shockless type….. A noise at spool changeover and a vibration in piping can be reduced to a minimum • Stable operation With a strong magnet and spring force, the valves are tough against contamination and thus ensure a stable operation


 

Description

Details

 FEATURES These are Solenoid Operated Directional Valves of high flow and low-pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design • Standard type….. Useable at high pressure: 31.5 MPa (4570 PSI) and high flow: 63 L/min. (16.6 U.S. GPM) • Shockless type….. A noise at spool changeover and a vibration in piping can be reduced to a minimum • Stable operation With a strong magnet and spring force, the valves are tough against contamination and thus ensure a stable operation

 SOLENOIDS • Solenoid Connectors (DIN connector) The solenoid connectors are conform to the international standard ISO 4400 (Fluid power systems and components- Three-pin electrical plug connectors- Characteristics and requirements) • AC Solenoids 50 to 60 Hz common service solenoids do not require rewiring when the applied frequency is changed • DC Solenoids (Reputable K-series) These DC solenoids have surge absorbers for K-series functions. The three advantages of them are as mentioned below: 1. Since surge voltage can be controlled to a very low figure, electric control devise, such as a computer, can be used without any interference like noise 2. There being no spark between contracts, the life of the relay becomes longer 3. Time lag for spool return after de-energisation of the solenoid is very short • R Type Solenoids These are rectifier and surge absorber incorporated direct current solenoids, which can be used by connecting directly to the AC power source. They have, like other DC solenoids, such advantages that the sound in on-off operation is quite low and the coils are hardly burnt out even if the spool is stuck at the halfway of its changeover for contaminant particles etc. Moreover, they can be used almost permanently without being affected by a surge voltage from the outside. Thus, they are the solenoids of high reliability and durability • Insulation Class of Solenoid Class H

 

Reviews